With technology evolving every day, the method of cleaning guns has undergone serious changes over the last decades. The market is now filled with sophisticated and easy to use kits, which do a splendid job. The two most common tools are Bore Snake and Cleaning Rods.
Now it is very easy to get confused when it comes to a debate on Bore Snake vs Cleaning Rod.
Both tools have their advantages and disadvantages, and it is up to you how you are going to work around them. So, it is always wise to educate yourself on the differences before you move ahead and acquire any of them.
Before you make purchases you must evaluate all the given options. Here is some valuable information that will help you in your quest.
Bore Snake Vs Cleaning Rod - The Facts
Now it can be a tough decision to make so to avoid any confusion we are going to look at both of them separately to understand all the aspects clearly.
The Advantages and Disadvantages Of Using A Bore Snake
The most important advantage is that these tools do not cause any damage to your firearm in any way. The best thing about this tool is that it is created to be utilized with a certain kind of barrel size.
Every time you use your gun it gets a few carbon deposits in it. This affects your trajectory in a negative way. A bore snake increases the accuracy level of your gun.
The other reason why you should use a bore snake is that it does the job in half the time. All you have to do is to select a bore snake of the right caliber. This tool is very easy to use. All you have to do is to apply a bit of solvent and then insert this into the chamber of your gun, and then begin cleaning.
These are not included in a standard cleaning kit and you will have to purchase them separately. Several brands manufacture this tool, so it should not be tough to locate.
You should also know that all snake bores are not the same, they are built as per the caliber of the gun. So, you should figure that out before you go out and get one. This tool can give your gun a proper cleaning that it needs.
You may be required to buy multiple ones if you have many guns and this could be expensive, this is the only drawback it has, but other than that it does a fabulous job in cleaning the gun.
The Advantages and Disadvantages Of Using Cleaning Rods
If you are a careful user then you could consider using this tool as it is very effective. This does clean a lot better than the snake bore. These tools are typically a single piece and they are made from durable materials, which show no wear or tear even after repeated usage.
You will also come across cleaning rods that have multiple joints that are very easy to carry as they do not take up too much space. You must remember that this is good for doing a bit of regular cleaning, if you plan to indulge in heavy-duty cleaning your rod may suffer a bit of damage.
This comes in different styles and from different brands. You need to do a bit of research on the type you want and then move ahead for your purchase.
How To Choose Between Bore Snake And Cleaning Rod
This is not tough to figure out at all. You need to first check the kind of gun that you are using. For example, if you are using semi-auto pistols you do not need to invest in bore snakes you can get the job done by using cleaning rods. Most users use cleaning rods that come in three pieces. Also, if you do not mind taking a bit of time in the cleaning process then this tool is just right for you.
If you prefer to give your gun a deep cleaning then you should consider using a cleaning rod without any hesitation. However, you may want to use a bore snake if you have trouble cleaning the gun in the chamber area. This tool is also very helpful in cleaning brand new guns.
You have to understand that keeping the bores clean at all times is very important to make sure that the firearm does not malfunction. Most importantly guns need to be cleaned so that you can achieve accuracy with every shot that is fired.
While using the bore snake with a solvent you can give your gun a light cleaning. The solvent will help you achieve a deeper clean in the barrel of the gun. If you are looking for a tool that will clean your gun in the shortest time then this is it.
If you are not in a hurry to give your gun a good cleaning then you could go for a cleaning rod as this is very helpful in getting rid of all the carbon deposits and the grit from the muzzle of the gun. The cleaning rods are made of aluminum or steel.
To cut a long story short both the tools are very effective and they do a great job. So, it is totally up to you on how intensely you want to clean your gun and how much time you wish to dedicate to that activity.
How To Go About Buying These Tools
Now, the market is flooded with several brands and you have to be careful how you tread. Not all brands offer fabulous products. Many brands offer substandard products for high prices and you need to stay away from them.
You should start by selecting a few brands and then researching them. Compare the prices and features and then make your move. Do not go out and pick up products simply because someone recommended them to you. You should always make an educated decision.
If you do not mind spending a bit of extra cash then you could consider buying from reputed brands. At least you can be assured of getting products of good quality. Another thing you must consider is the material that these are made from.
Any user will want to buy products that last for a long time, so check the description before you go out and buy these tools. So, before you buy a snake bore or a cleaning rod you need to have a deep understanding of what they are used for. Both the tools do a fabulous job and whichever you buy it will be a win-win situation for you.
So, this is all the information that you need which will help you comprehend the ongoing debate between Bore Snake vs Cleaning Rod. It is very important to keep your gun clean at all times. Both these tools do a wonderful job of keeping your firearm clean at all times.
However, if you want to buy something to clean your gun thoroughly then we would recommend that you buy a cleaning rod. There are several reliable brands that you can choose from. Figure out your personal preference and then make a move. Give your firearm the cleaning it deserves.
Featured image source: travisp11